Back to Main Menu

Haider, Waseem

Professor

FACULTY

More about Waseem Haider

  • Jabad, M. N. Bhuiyan, W. Haider, I. Shabib, Distinctive Features and Fabrication Routes of Metallic-Glass Systems Designed for Different Engineering Applications: A Review, Coatings 13(10), (2023), 1689.
  • S. Ali, F. Ahmad, P. Yusoff, N. Muhamad, W. Haider, K. Malik, C. Shahed, Interface and mechanical properties of graphene/copper composite with sonication induced Au decoration of graphene, Powder Technology, 430 (2023), 118979.
  • A. Raza, K. M. Deen, A. Asselin, W. Haider, TK diagrams to determine the impact of pH variation on 3D printed CoCr alloy implant corrosion, Journal of Electroanalytical Chemistry 929 (2023) 117087.
  • A. Raza, K. M. Deen, R. Jaafreh, K. Hamad, A. Haider, W. Haider, Incorporation of machine learning in additive manufacturing: a review, International Journal of Advanced Manufacturing Technology 122 (2022) pp. 1143-1166.
  • A. Raza, K.M. Deen, E. Asselin, W. Haider, A review on the electrocatalytic dissociation of water over stainless steel: Hydrogen and oxygen evolution reactions, Renewable and Sustainable Energy Reviews 161 (2022) 112323.
  • M. Maruf, M. Noor-A-Alam, W. Haider, I. Shabib, Enhancing controlled and uniform degradation of Fe by incorporating Mg and Zn aimed for bio-degradable material applications, Materials Chemistry and Physics 285 (2022), 126171.
  • A. Khaliq, A. Alghamdi, M. Ramadan, T. Subhani, W. Rajhi, W. Haider, M. Hasan, Intermetallic Compounds Formation during 316L Stainless Steel Reaction with Al-Zn-Si Coating Alloy, Crystals 12 (2022) 735.
  • Naseer, F. Ahmad, S. Ali, W. Haider, Powder injection molded nano copper oxide grafted graphene reinforced copper matrix composites, Powder Technology 397 (2022) 117101.
  • N. Al-Mamun, A. Jabed, M. Noor-A-Alam, W. Haider, I. Shabib, Electrochemical response in physiological environments and mechanical properties of Ti51Si24Ni14Nb11 and Fe40Ti30Al18Si12 thin film metallic glasses, Journal of Non-Crystalline Solids 575 (2022) 121209.
  • M. Maruf, S. Rizvi, M. Noor-A-Alam, D. Shin, W. Haider, I. Shabib, Corrosion resistance and thermal stability of sputtered Fe44Al34Ti7N15 and Al61Ti11N28 thin films for prospective application in oil and gas industry, Progress in Natural Science: Materials International 31 (2021) 688–697.
  • M. Nawaz, Nazal Naeem, R. Kahraman , M. F. Montemor , W. Haider and R. A. Shakoor, Effectiveness of Epoxy Coating Modified with Yttrium Oxide Loaded with Imidazole on the Corrosion Protection of Steel, Nanomaterials 2021, 11, 2291
  • H. M. Hamza, K. M. Deen, A. Khaliq, E. Asselin, W. Haider, Microstructural, Corrosion and Mechanical Properties of Additively Manufactured Alloys: A Review Critical Reviews in Solid State and Materials Sciences (2021) DOI: 10.1080/10408436.2021.1886044.
  • S. N. Ahmed, W. Haider, Enhanced photocatalytic activity of ZnO-graphene oxide nanocomposite by electron scavenging, Catalysts 11 (2021) 187.
  • K. M. Deen, M. J. K. Lodhi, E. Asselin, W. Haider, Charge Transport Characteristics of the Passive Oxide Film Formed on 3D Printed 316L Stainless Steel in the Presence of FeII/FeIII Species, The Journal of Physical Chemistry C 124 (2020) pp. 21435-21445.
  • N. S. Al-Mamun, W. Haider, I. Shabib, Corrosion resistance of additively manufactured 316L stainless steel in chloride-thiosulfate environment, Electrochimica Acta 362 (2020) 137039.
  • M. Khan, K. M. Deen, I. Shabib, E. Asselin, W. Haider, Controlling the dissolution of Iron through the development of nanostructured Fe-Mg for biomedical applications, Acta Biomaterialia 113 (2020) pp. 660-676.
  • N. S. Al-Mamun, K. M. Deen, W. Haider, E. Asselin, I. Shabib, Corrosion behavior and biocompatibility of additively manufactured 316L stainless steel in a physiological environment: the effect of citrate ions, Additive Manufacturing: 34 (2020) 101237.
  • H. Hamza, K. M. Deen, W. Haider, Microstructural examination and corrosion behavior of selective laser melted and conventionally manufactured Ti6Al4V for dental applications, Materials Science and Engineering C 113 (2020) 110980.
  • M M Khan, Z U Rahman, K M Deen, I Shabib, W Haider, “Sputtered Mg100-xZnx (0 x 100) systems as anode materials for a biodegradable battery aimed for transient bioelectronics”, Electrochimica Acta 329 (2020) 135129.
  • A Inam , M A Raza, M A Hafeez, S B Shah, M Ishtiaq, M H Hassan, M Irfan, A Nasik, I Siddique, O M Butt, A Maqbool, W Haider "Effect of voltage and spray–off distance of electric-arc spray technique on surface properties of nickel–chrome (Ni–Cr) coating developed on 304L stainless steel”, Materials Research Express 7 (2020) 016525
  • A Inam, Y Imtiaz, M A Hafeez1, S Munir, ZAli, M Ishtiaq, M H Hassan, A Maqbool and W Haider, “Effect of tempering time on microstructure, mechanical, and electrochemical properties of quenched–partitioned–tempered Advanced High Strength Steel (AHSS)”, Materials Research Express 6 (2020) 126509
  • H. Asgar, K. M. Deen, W. Haider, Estimation of electrochemical charge storage capability of ZnO/CuO/reduced graphene oxide nanocomposites, International Journal of Energy Research, (2019); 1-14.
  • A. Jabed, Z. Rahman, M. M. Khan, W. Haider, I. Shabib, Combinatorial development and in-vitro characterization of the quaternary Zr-Ti-X-Y (X-Y=Cu-Ag/Co-Ni) metallic glass for prospective bio-implants, Advanced Engineering Materials: (2019), 21, 1900726 https://doi.org/10.1002/adem.201900726.
  • N. Ahmed, A. Inam, W. Haider, γ-Fe2O3 photocatalyst immobilized on a porous Ni substrate for recyclable solar photocatalysis, Journal of Nanoparticle Research: (2019), 21:238
  • K. M. Deen, A. Farooq, M. Rizwan, A. Ahmad, W. Haider, “Electrochemical and Biological Response of Titanium (cp-Ti) after Silicon Ion Implantation”, Anti-Corrosion Methods and Materials: (2020) 1-6.
  • W. Haider, U. Shah, I. Shabib, K. M. Deen, “Formation of nanotubes on commercially pure titanium at high potential (3 10V) and their electrochemical response”, Materials Research Express 6 (2019) 065050.
  • M. J. Lodhi, K. M. Deen, W. Haider, Additively manufactured 316L stainless steel: an efficient electrocatalyst, International Journal of Hydrogen Energy:(2019) https://doi.org/10.1016/j.ijhydene.2019.07.217.
  • M. M. Khan, K. M. Deen, W. Haider, Combinatorial development and assessment of a Zr-based metallic glass for prospective biomedical applications, Journal of Non-Crystalline Solids:523 (2019) 119544.
  • A. Jabed, M. M. Khan, J. Camiller, M. Greenlee-Wacker, W. Haider, I. Shabib, Property optimization of Zr-Ti-X (X= Ag, Al) metallic glass via combinatorial development aimed at prospective biomedical application, Surface Coatings and Technology:372 (2019) pp. 278-287.
  • M. J. Lodhi, K. M. Deen, M. Greenlee-Wacker, W. Haider, Additively manufactured 316L stainless steel with improved corrosion resistance and biological response for biomedical applications, Additive Manufacturing 27 (2019) pp. 8-19.
  • U. Riaz, I. Shabib, W. Haider, “The current trends of Mg alloys in biomedical applications – A review”, Journal of Biomedical Materials Research Part B: Applied Biomaterials: 107, 6 (2019), pp. 1970-1996
  • M. Khan, I. Shabib, W. Haider, A combinatorially developed Zr-Ti-Fe-Al metallic glass with outstanding corrosion resistance for implantable devices, Scripta Materialia, Volume 162 (2019) pp. 223-229.
  • H. Asgar, K.M. Deen, Z. Rahman, U. Shah, M.A. Raza, W. Haider, Functionalized graphene oxide coating on Ti6Al4V alloy for improved biocompatibility and corrosion resistance, Materials Science and Engineering C 94 (2019) pp. 920–928.
  • M.J.K. Lodhi, K.M. Deen, W Haider, Corrosion behavior of additively manufactured 316L stainless steel in acidic media, Materialia, (2018), pp. 111-121.
  • U Riaz, Z ur Rahman, H Asgar, U Shah, I Shabib, W Haider, An insight into the effect of buffer layer on the electrochemical performance of MgF2 coated magnesium alloy ZK60, Surface and Coatings Technology, Volume, 344, (2018), pp. 514-521.
  • N. Ahmed, W. Haider, Heterogeneous photocatalysis and its potential applications in water and wastewater treatment: a review, Nanotechnology 29 (2018), 342001
  • U Riaz, L Rakesh, I Shabib, W Haider, Effect of dissolution of Magnesium alloy AZ31 on the rheological properties of Phosphate Buffer Saline, Journal of the mechanical behavior of biomedical materials, 85 (2018), pp. 201-2018.
  • M.J.K. Lodhi, K.M. Deen, ZU Rahman, A Farooq, W Haider, Electrochemical characterization and thermodynamic tendency of β-Lactoglobulin adsorption on 3D printed stainless steel, Journal of Industrial and Engineering chemistry (2018), https://doi.org/10.1016/j/jiec.2018.04.027 
  • H. Asgar, K.M. Deen, U. Riaz, Z. Rahman, U. H. Shah, W. Haider, Synthesis of graphene via ultra-sonic exfoliation of graphite oxide and its electrochemical characterization, Materials Chemistry and Physics: Volume 206 (2018) pp. 7-11.
  • M. M. Khan, A. Nemati, Z. Rahman, U. H. Shah, H. Ansgar, W. Haider, Recent Advancements in Bulk Metallic Glasses and Their Applications: A Review. (2017) https://doi.org/10.1080/10408436.2017.1358149.
  • S. Khalajabadi, A. Abu, N. Ahmad, M. Yajid, N. Redzuan, R. Nasiri, W. Haider, I. Noshadi, Bio-corrosion behavior and mechanical characteristics of magnesium-titania-hydroxyapatite nanocomposites coated by magnesium-oxide flakes and silicon for use as resorbable bone fixation material, Journal of the Mechanical Behavior of Biomedical Materials: Volume 77 (2018) pp. 360–374
  • U. H. Shah, Z. Rahman, K. M. Deen, H. Asgar, I. Shabib, W. Haider, Investigation of the formation mechanism of titanium oxide nanotubes and its electrochemical evaluation, Journal of Applied Electrochemistry: Volume 47, Issue 10 (2017) pp. 1147-1159.
  • U. H. Shah, K. M. Deen, H. Asgar, Z. Rahman, W. Haider, Understanding the mechanism of TiO2 nanotubes formation at low potentials (≤ 8 V) through electrochemical methods, Journal of Electroanalytical Chemistry, Volume 807 (2017) pp. 228–234.
  • MA Makhdoom, A Ahmad, M Kamran, K Abid, W Haider, Microstructural and Electrochemical behavior of 2205 Duplex Stainless Steel Weldments, Surfaces and Interfaces: Volume 9 (2017) pp. 189-195.
  • S. Khalajabadi, A. Abu, N. Ahmad, M. Kadir, A. Ismail, R. Nasiri, W. Haider, N. Redzuan, Biodegradable Mg/HA/TiO2 Nanocomposites Coated with MgO and Si/MgO for Orthopedic Applications: A Study on the Corrosion, Surface Characterization, and Biocompatibility, Coatings: Volume 7 Issue 10 (2017),154 pp. 1-24.
  • Zia ur Rahman, K.M. Deen, Lawrence Cano, Waseem Haider, The effects of parametric changes in electropolishing process on surface properties of 316L stainless steel, Applied Surface Science 410 (2017) pp. 432–444
  • U.H. Shah, K.M. Deen, Z. Rahman, H. Asgar, W. Haider, Peculiar behavior of TiO2 tubular structure for water reduction in dark and under natural light exposure, Materials Letters 198 (2017) pp. 188–191
  • S. Khalajabadi, N. Ahmad, S. Izman, A. Abu, W. Haider, M. Kadir, "In vitro biodegradation, electrochemical corrosion evaluations and mechanical properties of an Mg/HA/TiO2 nanocomposite for biomedical applications" Journal of Alloys and Compounds: Volume 696, (2017) pp. 768-781.
  • M. Abu-Shams, W. Haider, and I. Shabib, "Evolution of displacement cascades in Fe-Cr structures with different [001] grain boundaries". Radiation Effects and Defects in Solids.
  • F. Muhammad A. Ahmad, A. Farooq, W. Haider, "Effect of post weld heat treatment on mechanical and electrochemical properties of X2CrNiMo17-13-2 stainless steel", Journal of Materials Engineering and Performance: Volume 25, Issue 10 (2016) pp. 4283-4291.
  • Z. Rahman, I. Shabib, and W. Haider, "Surface characterization and cytotoxicity analysis of plasma sprayed coatings on titanium alloys" Materials Science and Engineering C 67 (2016) pp. 675–683.
  • Z. Rahman, L. Pompa, W. Haider, Electrochemical characterization and in-vitro bio-assessment of AZ31B and AZ91E alloys as biodegradable implant materials, Journal of Materials Science: Materials in Medicine 26 (2015) 217.
  • Z. Rahman, W. Haider, L. Pompa, K. Deen, “Electrochemical and Osteoblast Adhesion Study of Engineered TiO2 Nanotubular Surfaces on Various Titanium Alloys” Materials Science and Engineering C 58 (2016) pp. 160-168.
  • L. Pompa, Z. Rahman, E. Munoz, W. Haider, “Surface Characterization and Cytotoxicity Response of Biodegradable Magnesium Alloys” Materials Science and Engineering C: (2015) DOI: 10.1016/j.msec.2015.01.017.
  • P. Gill, V. Musaramthota, N. Munroe, A. Datye, R. Dua, W. Haider, A. McGoron, R. Rokicki, “Surface Modification of Ni-Ti Alloys for Stent Application after Magnetoelectropolishing” Materials Science and Engineering C: (2015) DOI: 10.1016/j.msec.2015.01.009.
  • R. Rokicki, W. Haider, S. Maffi, “Hemocompatibility Improvement of Chromium Bearing Bare Metal Stent Platform After Magnetoelectropolishing”, Journal of Materials Engineering and Performance: Volume 24, Issue 1 (2015) pp. 345-352.
  • C. Pulletikurthi, N. Munroe, D. Stewart, W. Haider, S. Amruthaluri, R. Rokicki, M. Dugrot, S. Ramaswamy, “Utility of Magneto-electropolished Ternary Nitinol Alloys for Blood-Contacting Applications”, Journal of Biomedical Materials Research Part B: Applied Biomaterials: (2014) DOI: 10.1002/jbm.b.33317.
  • M. Rizwan, A. Ahmad, K. M. Deen, W. Haider, “Electrochemical Behavior and Biological Response of Mesenchymal Stem Cells on cp-Ti after N-ions Implantation”, Applied Surface Science: Volume 320 (2014) pp. 718-724.
  • A. Farooq, K. M. Deen, M. A. Raza, R. Ahmad, A. Salam, I. H. Khan, W. Haider, “Peculiar Corrosion Behavior of SS316L in Simulated Cooling Water at Various pH”, Material Performance: Volume 53 No.10 (2014) pp. 44-47.
  • K. M. Deen, A. Farooq, M. A. Raza, W. Haider, “Effect of Electrolyte Composition on TiO2 Nanotubular Structure Formation and its Electrochemical Evaluation”, Electrochimica Acta: Volume 117 (2014) 329-335.
  • K. M. Deen, A. Farooq, M. A. Raza, R. Ahmad, W. Haider, "Estimating the Degradation of Methylethionium Chloride Dye on Nanotubular TiO2 Structure", Journal of Industrial and Engineering Chemistry (2014). http://dx.doi.org/10.1016/j.jiec.2014.07.003.
  • Z. Rahman, L. Pompa, W. Haider, Influence of Electropolishing and Magnetoelectropolishing on Corrosion and Biocompatibility of Titanium Implants, Journal of Materials Engineering and Performance: Volume 23, Issue 11 (2014) pp. 3907-3915
  • R. Rokicki, W. Haider, T. Hryneiewicz, “Influence of Sodium Hypochlorite Treatment of Electropolished and Magnetoelectropolished Nitinol Surfaces on Adhesion and Proliferation of MC3T3 Pre Osteoblast Cells”, Journal of Materials Science: Materials in Medicine: Volume 23, (2012) pp 2127-2139.
  • Ph.D., Mechanical Engineering, Florida International University, 2010
  • M.S., Materials Engineering, Tampere University of Technology, Finland, 2006
  • B.S., Metallurgical and Materials Engineering, Middle East Technical University, Turkey, 2003
  • Additive Manufacturing
  • Titanium Oxide Nanoparticles/Nanotubes
  • Thin Films
  • Graphene Based Nanocomposites
  • Piezoelectric Materials
  • Biomaterials
  • Surface Engineering
  • Photocatalysis
  • Electrochemistry